Mitel SME Server V5 with ServiceLink Guía de usuario Pagina 29

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 91
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 28
Chapter 6. Installing And Configuring Your SME Server V5 with ServiceLink Software
The next step after selecting a connection type is to enter the specific parameters representing that connection.
6.11. Server and Gateway Mode - Dedicated
How you configure your server’s external interface depends on whether you are using a dedicated connection or a dialup connection. Therefore, if
you configured your server for "server and gateway mode - dedicated connection" you will be presented with very different configuration screens
than if you configured the server for "server and gateway - dialup connection" (as discussed in the next section).
6.11.1. Configuring Your External Ethernet Adapter
As you did previously with your local ethernet adapter, you need to configure the driver for your external ethernet adapter. As before, the software
will attempt to detect the card. If it correctly identifies the card, you can proceed using Option 1, "Keep current driver". If it does not, you will need
to manually select the driver.
6.11.2. Assigning Your Ethernet Adapters to Network Connection
To communicate successfully, your server needs to know which ethernet adapter connects it to the internal network and which adapter connects it to
the external network/Internet. Your server will make this designation automatically - the first ethernet adapter (in position "eth0") will normally be
assigned to the local, internal network and the second ethernet adapter (in position "eth1") will normally be assigned to the external network/Internet.
In the event that this assumption is incorrect, this screen allows you to easily swap that designation.
If you don’t know which ethernet adapter is designated to eth0 and which is designated to eth1, we suggest you leave it in the default configuration
while completing the rest of the screens. You will later have the opportunity to "Test Internet Access" from the server console. If your test fails at that
time, return to this screen, swap the card assignment and retry the test.
29
Vista de pagina 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 90 91

Comentarios a estos manuales

Sin comentarios