Mitel SME Server V5 with ServiceLink Guía de usuario descargar pdf (Pagina 25)

Chapter 6. Installing And Conﬁguring Your SME Server V5 with ServiceLink Software

• the system password

• the type of ethernet adapters (network interface cards, or NICs) that will be used by your server to communicate with the internal network and the

Internet (or external network). Typically, the server software will detect this information automatically. (Note that if you are connecting to the

Internet with a dialup connection, you only need one ethernet adapter.)

• conﬁguration for the internal (local) network - you must provide information about your internal network so that your server can communicate

with other machines on your local network.

• operation mode - you must select whether your server will operate in server and gateway mode or server-only mode.

• conﬁguration for the external network/Internet - you must conﬁgure your server so that it can communicate with your ISP either by a dedicated

connection or using a dialup connection (only for server and gateway mode).

• miscellaneous information - there are several ﬁnal items to conﬁgure, such as whether to allow your users to use a proxy server, whether to

provide status reporting to Mitel Networks Corporation, and whether you wish to secure the server console so that it can only be accessed using

the administrator’s password.

As you select a given conﬁguration parameter, you will be presented only with the screens necessary for your given conﬁguration. Each screen will

provide you with a simple, detailed explanation of the required information.

Note: The "Keep" option: As you move through the conﬁguration screens, you will notice that there is a "Keep" option which will allow you to keep

the choices you may have made previously. Obviously, when you are conﬁguring your system for the ﬁrst time, many of these choices will not have

been made, but if you later go back to re-conﬁgure the system, this option can save time.

6.6. Setting Your Administrator Password

As shown in the image below, the ﬁrst thing you will be asked to do is to set the system password. This is the password you will enter to access the

web-based server manager. Depending on how you conﬁgure the system, you may also need to enter this password to access the server console. It is

extremely important that you choose a good password and keep that password secret.

Anyone who gains access to this password has the power to make any change to your server!

After you enter the password once, you will be asked to type it again to conﬁrm that the password was recorded correctly. The password will also be

examined to determine how strong it is from a security point-of-view. If it is found to be weak (for instance, a dictionary word), you will see an

additional screen asking if you really want to use this password. You will have the option to go back and change to a stronger password or to

continue using the weaker password.

Note: You can use any ASCII printable characters in the administrator password. As this password gives someone total control over your server,

you should choose a password that cannot be guessed easily. A good password should contain mixed upper- and lower-case letters, numbers and

punctuation, yet also be easy to remember. An example might be "IwmSMES!" as in "I want my SME Server!" (Please don’t use this example as

your password!)

6.7. Conﬁguring Your System Name and Domain Name

As shown below, your next step is to enter the primary domain name that will be associated with your SME Server V5 with ServiceLink. (You can

later conﬁgure other virtual domains that work with the server.)

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 90 91

Sin comentarios

Mitel SME Server V5 with ServiceLink Guía de usuario Pagina 25