Mitel SME Server V5 with ServiceLink Guía de usuario Pagina 21

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 91
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 20
Chapter 5. Hardware Requirements of the SME Server V5 with ServiceLink Host Computer
Znyx ZX312 (EtherArray), ZX314, ZX315, ZX342, ZX344, ZX345, ZX346, ZX348, ZX351
If your adapter is not listed above, it may be supported if it is based on one of the following chipsets (check with Red Hat’s web site mentioned
above for confirmation):
Alteon AceNIC Gigabit Ethernet
Compex RL2000
DEC Tulip
KTI ET32P2
NetVin NV5000SC
RealTek RTL8029, RTL8029AS, RTL8129/8139
VIA Rhine, VT86C926 "Amazon"
Winbond 89C940
5.6. Supported SCSI Adapters
If the computer you plan to use for your server has a SCSI hard disk, your SCSI adapter must be supported by Red Hat Linux 7.1. PLEASE NOTE:
Only PCI SCSI adapters are supported by the SME Server V5 with ServiceLink. Furthermore, they must contain a SCSI BIOS so that the PC can
boot from the SCSI disk.
Note: As SME Server V5 with ServiceLink is based on Red Hat Linux version 7.1, PCI-based SCSI adapter that can work with Red Hat Linux 7.1
should also work with SME Server V5 with ServiceLink. You can find an up-to-date searchable database at Red Hat’s web site at:
http://hardware.redhat.com/redhatready/cgi-bin/us/db-hcl.cgi (Choose Storage Device/Controller from the "Hardware Category" menu.)
Because there are a very large number of SCSI adapters supported, the list below contains the overall categories of supported adapters. If your
adapter falls into one of these categories, it is probably supported. Please check with your Mitel authorized reseller to verify support for your card.
Be aware that your Mitel authorized reseller may not be able to support you if choose to use a SCSI adapter that is not on our supported hardware
list. Please consult your Mitel authorized reseller for more information.
Note: In the list below the use of an ’x’ symbolizes a wildcard. For example, ’AHA-29xx’ indicates it applies for the ’AHA-2930’ as well as the
’AHA-2940’ and any other models beginning with ’AHA-29’.
Adaptec AIC-78xx, AHA-29xx, AHA-394x, 29160/39160, AHA-1520B
Advansys ABP510, ABP514x, ABP930/40, ASC1200
AMI MegaRAID
Artop Electronic Corp AEC671x
Dell PowerEdge RAID Controller 2
1
, Expandable RAID Controller 2/3
Future Domain TMC-18C30
HP NetRAID-4M
IBM ServeRAID
ICP Raid Controller GDT 6xxx, GDT 7xxx
Initio Corp INI-940, INI-950, INI-9100/9100W, 360P
Intel 80960RP
LSI MegaRAID express500
Mylex (BusLogic) FlashPoint Series, MultMaster 01/10
Symbios 53c1510, 53c8xx
1. Note that the firmware on this controller may need to be updated before it can work your server. See http://www.e-smith.com/faq/ for more information.
21
Vista de pagina 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 90 91

Comentarios a estos manuales

Sin comentarios