
5320 SIP User and Administrator Guide
- 44 -
Elements of Your Cordless Module and Accessories
Feature Function
1) Cordless Module Attached to the back of the phone, the module contains a
Light Emitting Diode (LED) indicating that a cordless device is
in use; also indicates the state of pairing between the module
and a cordless device.
2) Cordless Headset (photo shows
DECT headset)
Cordless handsfree operation for calls. If you are using a
cordless headset, you do not need to use the handset.
3) Cordless Headset Charging Cradle Provides power to recharge the cordless headset battery.
4) Cordless Handset Charging Plate Provides power to recharge the cordless handset battery.
Replaces the handset cradle plate supplied with the phone for
corded handsets.
5) Cordless Handset Cordless operation for handset calls. (You can transfer from
the phone handset to the cordless headset at any time.)
6) Cordless Module Pairing Button Initiates pairing between the Cordless Module and a cordless
accessory.
7) Cordless Headset Cradle Cable Connects to the Cordless Module to provide power to the
charging cradle.
Handset/Headset Combinations
The following combinations of corded and cordless headset and handset are supported on the
5330e/5340e IP Phone:
• Corded handset only
• Corded handset and corded headset
• Cordless handset only
• Cordless handset and cordless headset
• Corded handset and cordless headset
• Corded headset and cordless handset
The DECT Cordless Handset and the DECT Cordless Headset are both Mitel-branded
accessories available only from Mitel.
Pairing the Cordless Module and Accessories
Before using a cordless handset or headset, it must establish communication with the Cordless
Module using a procedure called pairing.
Pairing a DECT Cordless Accessory with a DECT Cordless Module
Comentarios a estos manuales