Mitel 300 Manual de usuario descargar pdf (Pagina 4)

To change the Wireless Server IP address, follow these steps:

1. Open your browser and type the IP Address of the KWS300. The factory default is 192.168.0.1.

2. When prompted, use the following default Web Access username and password:

 Web Access Username: admin

 Web Access Password: kws300

3. Select Configuration.

4. Under IP select DHCP assigned or Use static IP address.

a. If DHCP assigned is selected:

i. Select Save and select Ok.

ii. When you return to the General Configuration screen, select reboot.

b. If Use static IP address is selected:

i. Enter the appropriate values on the page.

ii. Select Save and select Ok.

iii. When you return to the General Configuration screen, select reboot.

5. Change your PC’s IP address parameters back to their original values.

Enabling Support for the KWS300

To enable support for the KWS300, follow these steps:

1. Select Start > All Programs > NetVanta UC Server > Server Configuration Wizard.

2. Select the Phone Types step.

3. Select Next to bypass the Welcome screen.

4. Select the check box next to Polycom KWS300 (see the figure below).

1 2 3 4 5 6 7 8 9

Sin comentarios

Mitel 300 Manual de usuario Pagina 4