Mitel V5 Manual de usuario descargar pdf (Pagina 41)

Chapter 6. Installing And Conﬁguring Your SME Server V5 with ServiceLink Software

The next step after selecting a connection type is to enter the speciﬁc parameters representing that connection.

6.11. Server and Gateway Mode - Dedicated

How you conﬁgure your server’s external interface depends on whether you are using a dedicated connection or a dialup connection.

Therefore, if you conﬁgured your server for "server and gateway mode - dedicated connection" you will be presented with very

different conﬁguration screens than if you conﬁgured the server for "server and gateway - dialup connection" (as discussed in the

next section).

6.11.1. Conﬁguring Your External Ethernet Adapter

As you did previously with your local ethernet adapter, you need to conﬁgure the driver for your external ethernet adapter. As before,

the software will attempt to detect the card. If it correctly identiﬁes the card, you can proceed using Option 1, "Keep current driver".

If it does not, you will need to manually select the driver.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 132 133

Sin comentarios

Mitel V5 Manual de usuario Pagina 41